How To Get A Broken Window Fixed

Download Article

Download Article

Instead of hiring someone to replace a broken window, there are ways that y'all tin can fix a cleaved window yourself. If the window has minimal harm, like a crack or a modest pigsty, at that place are ways that you can perform a temporary fix to keep the window intact until you can fully repair it. Notwithstanding, a temporary prepare won't last forever and you lot'll eventually have to remove the cleaved window and replace information technology with a new pane of glass.

1. 1

   Scrape abroad the putty around the broken window pane. Utilise a utility knife, chisel, or putty knife to scrape away the putty surrounding the broken pane. This will loosen the drinking glass and will permit you lot to remove it easily.^[i]

   • Wear thick work gloves and goggles for prophylactic.

2. 2

   Remove any nails or clips with pliers. Some windows will have nails or clips that help hold the pane in place. Apply a fix of pliers to grab onto any nails or clips in the frame and pull them out.^[2]

   Advertisement

3. 3

   Pull all the shards of glass out of the window frame. Jerk the pieces of glass that are still stuck to the frame until they come loose. Once they are loose, remove the shards of glass and dispose of them. Go on doing this until there is no more glass in the frame.^[3]

4. 4

   Sand the expanse around the broken window with 100-180 grit sandpaper. Polish out the area effectually the broken window pane past going back and forth over any remaining putty or sealant. Once the area is smoothed out, wipe the surface area downwards with a damp rag to remove any excess particles left over from sanding.^[4]

Advertisement

1. 1

   Measure the area effectually the broken window pane. Use a tape measure to get the length and width of the window frame. Measuring the expanse volition assistance you determine how large your new piece of glass should be. Decrease ¹⁄_viii inch (0.32 cm) from the measurement. The additional space will ensure that the glass volition fit in the window and won't crack if the frame expands during cold weather.^[five]

2. 2

   Purchase a new pane of glass. Become to a hardware or drinking glass shop with your measurements and buy a new piece of glass. They will cut your drinking glass to your specifications.

3. iii

   If the frame is fabricated out of woods, use a painter's brush to apply a layer of wood sealer around the cleaved window frame. Let the sealer dry for one or two hours before moving onto the next step.^[6]

   • Wood sealer volition help the putty or glazing compound adhere to the wood and will help with atmospheric condition-proofing your windows.

4. iv

   Apply putty or a glazing compound effectually the frame. This will aid concord your new pane of drinking glass in place. If you lot're using putty, curlicue it in your hands to warm it upwards, then apply information technology to the interior of the frame. If yous're using a glazing chemical compound, squeeze a tube of the chemical compound onto the frame, around the empty hole. If your compound came in a container, use a putty pocketknife to use it.^[7]

   • Don't worry well-nigh laying also much putty or compound considering you'll be scraping the backlog abroad later.
   • You can purchase putty or a glazing compound from the hardware store or online.

5. 5

   Push button your new pane of drinking glass into the empty opening. Take your new piece of drinking glass and carefully press it into the opening. The glass should printing against the putty and adhere to it.^[8]

6. 6

   Reinsert any nails or clips that you removed earlier. Replace the clips or nails that you lot removed before by lightly tapping them dorsum into the frame. This will help your pane of glass stay in place.^[9]

7. 7

   Apply putty or glazing compound around the new window. Apply a layer of putty or compound around the edges of the new pane of drinking glass. This will ensure that it'due south held in place with the putty on both sides of the window and will concur your new glass in place.^[10]

8. 8

   Polish the putty out and let it dry out. Utilise a putty knife to smooth out the compound around the new window pane. Remove whatever excess putty or chemical compound so that information technology runs flush with the frame and looks make clean. Allow the putty to dry overnight and then that it sets.^[11]

   • Recall to smooth the putty on both sides of the window.

Advertisement

1. 1

   Apply a piece of masking tape to both sides of a crack. Get a roll of masking record and cut two pieces that are large plenty to cover the unabridged cleft or hole in your window. Use the record over the fissure, then go to the other side of the window and identify another piece of tape on the other side of the crack.^[12]

   • Applying tape to the fissure should temporarily cease the window from peachy further.

2. 2

   Paint over small holes or cracks with a clear boom smooth. Dip the nail polish brush into the smooth and apply it over the cracks or holes to fill up them in. Let the polish dry, so repeat the process 3 to four times to completely seal off the cracks or holes in your window.^[xiii]

   • Clear nail polish volition simply seal small-scale cracks and holes in your window and shouldn't be used for windows that have sustained significant damage.

3. three

   Mucilage a mesh patch over the cracks. Y'all tin use the mesh from a pair of nylon stockings or pantyhose. Cut a foursquare from the fabric that's large enough to fit over the entire crack. Apply super gum around the edges of the mesh patch and stick it on top of the crack in your window. Concur the mesh patch there for two to three minutes or until the mucilage dries. This will aid continue bugs out of your house and will reduce drafts acquired by cold air. ^[fourteen]

4. 4

   Tape a slice of thick plastic around the hole. If you lot have a larger hole in your window and don't take the time to replace it, yous can stop unwanted airflow through the hole. Cut a square of plastic from a tarp or a thick trash bag that's large enough to fit over the hole. Apply masking or duct tape effectually the edges of the plastic, sealing it onto your window.^[fifteen]

Advertizement

Add New Question

• Question

  How do you repair vinyl windows?

  

  Michael Fox is a Window Repair Specialist and the President at Window Repair Systems and WindowHardwareDirect.com, based in Westminster, South Carolina. With over 25 years of experience, Michael specializes in commercial window repair and service. He holds a business degree from Monroe Community College and SUNY Brockport. Michael has helped Window Repair Systems and WindowHardwareDirect.com become an manufacture leader in commercial window repair and hardware distribution, servicing schools and businesses and training large public school systems.

  

  Window Repair Specialist

  Proficient Answer

  When your vinyl window fails, and let'southward say you can't open it upwardly, you'd want to bank check for the balances to make sure they're operational. Most likely, the balances are broken. They wear out over fourth dimension. Then and then you would demand to look at the balances and get the weight stamp number off of them. Then, you tin reorder those balances from that stamp. If it's a spiral blazon of residuum, you lot'll demand to have information technology out and measure out that. Then you would ultimately need to measure and counterbalance the sash, then you can get the length and weight for that window, so you can supercede those balances. After that your window would work like new.

Ask a Question

200 characters left

Include your e-mail address to go a message when this question is answered.

Submit

Advertisement

Things You'll Need

• Masking or duct tape
• Clear smash shine
• Thick plastic trash handbag or tarp
• Pantyhose or nylon stockings

• Thick gloves
• Rubber goggles
• Utility knife or chisel
• Pliers
• Sandpaper

• Measuring tape
• Pane of drinking glass
• Wood sealer
• Putty or glazing compound
• Putty knife

Nearly This Article

Commodity Summary 10

Big breaks in your window will commonly demand to be replaced. Notwithstanding, if you just have a minor crevice or hole, you lot tin temporarily ready information technology to keep the window intact. Try taping over the ends of the crevice with masking tape to prevent it from getting bigger. Y'all can also paint over small holes or cracks with clear nail smooth. To forestall drafts, tape a piece of thick plastic or a slice of a trash bag over the hole. For minor holes, cut a foursquare of nylon from a pair of pantyhose and use super glue to secure it onto the window. To learn how to supplant a pane of glass, read on!

Did this summary aid yous?

Thanks to all authors for creating a page that has been read 60,099 times.

Did this commodity help you?

Source: https://www.wikihow.com/Fix-a-Broken-Window

Posted by: fosterwhippyraton.blogspot.com

Share this post